Forte L4-2.0L (2010)
6. Remove the feed tube(A) from the rack housing.
7. While moving the rack slowly, drain the fluid from the rack housing.
8. Unstake the tab washer(A) which fixes the tie rod(B) and rack(C) with a chisel.
9. Remove the tie rod(B) from the rack(A).
CAUTION:
Remove the tie rod(B) from the rack(A), taking care not to twist the rack.
10. Remove the yoke plug locking nut(A).
11. Remove the yoke plug(B) with a 14mm socket(A).
12. Remove the lock nut(D), yoke plug(C), rack support spring(B) and rack support yoke(A) from the gear box.
