Forte L4-2.0L (2010)
Axle Beam: Service and Repair
Repair procedures
Replacement
1. Remove the rear wheel & tire.
Tightening torque Nm (kgf.m, lb-ft) :
90 - 110 (9.0 - 11.0, 65 - 80)
2. Loosen the bolts (A).
Tightening torque Nm (kgf.m, lb-ft) :
65 - 75 (6.5 - 7.5, 47 - 54)
3. Loosen the screw (B).
4. Remove the wheel speed sensor cable and the loosening the mounting bolts.
Tightening torque Nm (kgf.m, lb-ft) :
60 - 70 (6.0 - 7.0, 43 - 50)
5. Remove the wheel speed sensor cable and parking brake cable mounting bracket bolts.
6. Remove the rear hub unit bearing.
