Forte L4-2.0L (2010)
Clutch Slave Cylinder: Overhaul
Disassembly
1. Remove the clutch hose, valve plate, spring, push rod, and boot.
2. Remove any dirt from the piston bore opening of the release cylinder.
3. Remove the piston from the release cylinder using compressed air.
CAUTION:
-
Use rags to prevent the piston from popping out and causing injury.
-
Apply compressed air slowly. Keep the fluid from splashing in your eyes or on your skin.
Reassembly
1. Apply specified brake fluid to the release cylinder bore and the outer surface of the piston and piston cup, and push the piston cup assembly into
the cylinder.
Specified fluid: Brake fluid DOT 3 or DOT 4
2. Install the valve plate(A), Spring(B), push rod(C) and boot(D).
