Optima L4-2.4L (2001)
9. Remove window glass.
1. Reconnect window operating switch.
2. Connect negative battery cable.
3. Turn ignition "ON" and position window glass about halfway.
4. Turn ignition "OFF".
5. Remove glass run channel.
6. Remove two glass mounting bolts from window regulator assembly.
7. Remove door glass carefully. Hold glass from both its inner and outer surfaces. While tilting it toward hinge side of door, pull it out from
outside door frame.
8. Disconnect negative battery cable.
10. Remove regulator assembly.
1. Disconnect window regulator motor connector.
2. Remove seven nuts from door frame.
3. Remove window regulator assembly from out of access hole.
11. Installation is the reverse of removal.