Optima L4-2.4L (2001)
Brake Drum: Service and Repair
REAR DRUM BRAKE LININGS AND REAR WHEEL CYLINDERS
1. Remove the brake drum and check the thickness of brake shoe lining for wear. Check the automatic brake adjusting system by hand to see if it
operates smoothly. Also see if the gears are in proper mesh with each other. To assure smooth functioning, apply a very thin coat of grease to the
friction surface of adjuster and link shaft.
2. Inspect the wheel cylinder boots for evidence of a brake fluid leak. Visually check the boots for cuts, tears or heat cracks. (A slight amount of fluid
on the boot may not be a leak, but may be preservative fluid used at assembly.)
1. Checking the brake shoes for wear.
Thickness of lining "B" [Limit]: 0.8 mm (0.032 in.)
