Optima L4-2.4L (2001)
2.
Connect the Optima 10 pin ECU adapter cable to the reprogramming adapter cable connector.
3.
Remove the program card from the upper slot on the Hi-Scan Pro tool and insert the reprogramming card.
4.
Connect the cigar lighter power adapter to the Hi-Scan Pro and connect the reprogramming adapter power supply cable to the cigar lighter power
adapter.
5.
Connect the Hi-Scan Pro to the vehicle 10 pin check connector located under the dash next to the OBDII connector.
6.
Connect the cigar lighter power adapter to vehicle cigar lighter receptacle.
* NOTICE
Power supply interruptions will prevent proper reprogramming. Make sure connectors are securely and completely inserted.
7.
Turn ignition key to "ON".
8.
Turn Hi-Scan Pro tool on, select "OPTIMA 2.4D THERMOSTAT ERROR [P0128]" and press the "ENTER" key.