Optima L4-2.4L (2001)
Seat Belt: Service and Repair
Rear Lap / Shoulder Belt Assembly
REMOVAL
1. Remove rear seat cushion.
2. Remove side bolster.
1. Fold rear seatback for the floor of body.
2. Remove two mounting bolts from rear seat hinge.
3. Remove one bolt from side bolster.
3. Remove one bolt from lap belt mounting bracket.
4. Retract belt slowly as far as belt will go.
5. Remove C-pillar trim.
6. Remove package tray.
7. Remove one bolt and one sheet metal screw to attach retractor assembly.
INSTALLATION
1. Install retractor mounting bolt and sheet metal screw.
2. Install package tray.
3. Install C-pillar trim.
4. Install one bolt through lap belt mounting bracket.
Tighten mounting bolt to 29 - 40 lb-ft (40 - 55 N.m, 4.0 - 5.5 kg-m)
5. Install side bolster.
6. Install rear seat cushion.
