Optima L4-2.4L (2001)
CAUTION: Apply multipurpose grease (CASMOLY L9508) to the grease home of bearing sleeve and contact point of release fork.
5. Install the release lever to the release fork.
CAUTION: If transaxle assembly is installed to engine without doing this step, release bearing can be separated according as the release fork
rotates free.
6. Install the transaxle assembly to the engine.
7. After finishing step 6, pushing the release lever to the arrow mark it is sounded click that the release bearing and clutch cover are aligned correctly.
Release lever operating range: 3° or less
If the range is over 3° it is a symptom that the release bearing and clutch cover are not aligned correctly. So, push the release lever to the arrow
mark one more time.
