Optima L4-2.4L (2001)
2. Install the boots.
3. Remove the tape.
4. Fill the inside of the B.J. and B.J. boot with specified grease.
Recommended grease
5. Fill the inside of D.O.J and D.O.J boot with specified grease.
6. Install the D.O.J cage, balls, inner race and fit the snap ring.
7. Fit the drive shaft into the D.O.J outer race and install the circlip.
8. To adjust the amount of air inside the D.O.J boot, set the D.O.J boot bands at the specified distance and tighten the D.O.J boot band securely.
T.J. - B.J. Type
COMPONENTS