Optima L4-2.4L (2001)
3. To install the dynamic damper, keep the B.J. and shaft in a straight line and secure the dynamic damper in the direction illustrated and install the
small boot band.
4. Apply grease into the T.J. boot and install the boot.
5. Add specified grease to the B.J. as much as wiped away at the time of inspection.
6. Install the boots.
7. Tighten the B.J. boot bands.
8. To control the air in the T.J. boot, keep the specified distance between the boot bands when they are tightened.
Standard value
9. Tighten the T.J. boot bands.
G.I.-A.C Type
FRONT DRIVE SHAFT
(G.I.-A.C TYPE)