Optima V6-2.7L VIN 4 (2007)
3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only
momentarily.
FRONT DOOR LOCK SWITCH INSPECTION
1. Remove the front door trim panel.
2. Disconnect the 6P connector from the actuator.
3. Check for continuity between the terminals in each switch position according to the table.
REAR DOOR LOCK SWITCH INSPECTION
1. Remove the rear door trim panel.
2. Disconnect the 6P connector from the actuator.
3. Check for continuity between the terminals in each switch position according to the table.
