Optima V6-2.7L VIN 4 (2007)
1. Install the new Side Impact Sensor with the bolt then connect the SRS harness connector to the Side Impact Sensor.
Tightening torque: 1.0 - 1.4 kgf.m (10.2 - 13.8 Nm, 7.5 - 10.2 lb.ft)
2. Install the rear seat.
3. Reconnect the battery negative cable.
4. After installing the Side Impact Sensor, confirm proper system operation: Turn the ignition switch ON, the SRS indicator light should be turned on
for about six seconds and then go off.
