Optima V6-2.7L VIN 4 (2007)
5. Remove the ball joint assembly mounting bolt (A) from the knuckle.
Tightening torque Nm (kgf.m, lb-ft): 100 - 120 (10 - 12, 72 - 86)
6. Remove the tie rod end split pin and castle nut.
Tightening torque Nm (kgf.m, lb-ft): 24 - 34 (2.4 - 3.4, 17 - 25)
7. Disconnect the tie rod end (A) from the knuckle using the SST (09568 - 4A000).
Tightening torque Nm (kgf.m, lb-ft): 100 - 120 (10 - 120, 72 - 86)
8. Loosen the screws and remove the brake disc (A) from the front hub assembly.
9. Remove the strut assembly mounting bolts (A) and nuts.
Tightening torque Nm (kgf.m, lb-ft): 140 - 160 (14.0 - 16.0, 101 - 116)
