Optima V6-2.7L VIN 4 (2007)
2. Remove the hub from the knuckle assembly using the SST (09545-34100).
3. Remove the wheel bearing inner race from the hub using the SST (09432-11000, 09545-34100).
4. Remove the wheel bearing outer race from the hub using the SST (09216-21600, 09216-21100).
INSPECTION
Wheel Bearing Check
1. Raise the vehicle until the front tires are off the floor.
- Make sure the wheels are in a straight forward position.
NOTE:
Make sure the wheel rotates freely and that the brake pads are retraced sufficiently to allow free movement of the tire and wheel assembly.
Spin the tire by hand to check the wheel bearings for roughness.
