Optima V6-2.7L VIN 8 (2006)
1. Measure the inside diameter of the brake drum. Check the runout of brake drum by using a dial indicator.
2. Measure the brake shoe lining thickness.
3. Inspect the brake lining and drum for proper contact.
4. Inspect the wheel cylinder outside for excessive wear and damage.
5. Inspect the backing plate for wear or damage.
INSTALLATION
1. Apply the specified grease to the locations indicated in the illustration and to each component.
^
Shoe and backing plate contact surfaces
^
Shoe and anchor plate contact surfaces
Recommended grease: Multipurpose grease SAE J310, NLGI No.2