Optima V6-2.7L VIN 8 (2006)
Parking Lamp: Removal and Replacement
Removal and Installation
TAIL, PARKING AND LICENSE LAMPS
REMOVAL (OUTSIDE)
1. Disconnect negative battery cable.
2. Remove two bolts from service hole cover.
3. Remove four nuts attaching rear combination light assembly to vehicle.
4. Disconnect electrical connector.
5. Remove light assembly.
REMOVAL (INSIDE)
1. Disconnect negative battery cable.
2. Remove three screws and thirteen fasteners from trunk lid trim.
3. Remove back panel molding assembly.
1. Disconnect electrical connector.
2. Remove one screw from outside of trunk lid.