Optima V6-2.7L VIN 8 (2006)
9. Loosen the upper arm mounting nut but do not remove it.
10. Using the special tool, disconnect the upper arm from the knuckle.
11. Remove the front axle and knuckle together.
12. Installation is reverse of removal.
DISASSEMBLY
1. Remove the brake disc from the hub.
2. Remove the snap ring.
3. Using the special tool, disconnect the hub from the knuckle.
4. Using the special tool, remove the wheel bearing inner race from the hub.
5. Using the special tool, remove the wheel bearing outer race from the knuckle.
