Optima V6-2.7L VIN 8 (2006)
5. Using the special tool, press-in the tone wheel.
6. Fit the hub and bearing assembly to the brake backing plate so that the rounded area of the bearing outer race is placed facing upward.
NOTE: If it is difficult to fit, adjust the parking brake adjusting nut to enlarge the space of the shoe and lining assembly.
7. Tighten the 4 bolts to the specified torque.
8. Install brake disc.
9. Install the caliper assembly to the carrier.
10. Rotate the hub to seat the bearing.
11. Using a spring balance, measure the wheel bearing starting torque.
Standard value
Starting torque ............................................................................................................................................. 28 N (18 kg cm, 16 inch lbs.) or less
