Optima V6-2.7L VIN 8 (2006)
1. Check the drive shaft boots for damage and deterioration.
2. Check the splines for wear and damage.
INSTALLATION
1. Coat gear oil to the drive shaft splines and differential case sliding surface.
2. Before installing the drive shaft, set the opening side of circlip facing downward.
3. After installation, check that the drive shaft cannot be removed by hand.
4. Install the washer under the drive shaft nut with facing the convex side outward as shown in the illustration.
5. Tighten the following parts to the specified torque.
D.O.J.-B.J. Type
COMPONENTS
