Rio L4-1.5L (2001)
Brake Hose/Line: Service and Repair
Removal
1. Remove the be pipe with the SST.
2. Disconnect the clip and remove the flexible hose from the bracket.
Installation
1. Fix the flexible in the bracket and install the clip.
2. Connect the flexible hose to the brake pipe and tighten the flare with the SST.
Caution Verify that the hose is not twisted. Verify that the hose does not contact other parts when the vehicle bounces or when the steering wheel
is turned fully right or left.
Tightening torque:
13 - 22 Nm 1.3 - 2.2 kg-m, 9 - 16 ft. lbs.)