Rio L4-1.5L (2001)
Installation
1. Install condenser in reverse order of removal.
Note:
-
Apply clean compressor oil to O-ring before connecting fittings.
-
Do not apply compressor oil to fitting nuts.
-
Remove protector before installing radiator brackets.
-
When installing a new condenser add compressor oil through high-pressure pipe port of compressor. Compressor oil 1.22 cu in (20 cc)
Tightening torque: Condenser inlet: 87 - 174 lb-in (9.8 - 19.6 N.m, 1.0 - 2.0 kg-m)
