Rio L4-1.5L (2001)
Air Bag(s) Arming and Disarming: Service and Repair
Power Supply Deactivation
Airbag-SRS diagnostic unit contains a backup power supply. Failure to follow this procedure could cause airbag modules to deploy during service
procedures, which may cause serious injury.
Before servicing
1. Turn the ignition switch to LOCK.
2. Disconnect the battery.
3. Wait 10 minutes for the backup power to discharge completely.
After servicing
1. Reconnect the battery.
2. Turn the ignition switch to ON.
3. Verify that airbag indicator illuminates for 4 - 6 seconds and then goes off.
