kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

ABOUT US
Canister Close Valve <--> [Evaporative Check Valve] > < Canister Purge Solenoid|Description and Operation

Rio L4-1.5L (2001)

Page 1
background image

Canister Purge Solenoid: Testing and Inspection

Evaporative (EVAP) emission purge control solenoid valve

Inspection

1. Disconnect vacuum hoses from EVAP canister purge solenoid valve.

2. Verify that no air flows through valve.
3. Disconnect valve connector and apply 12 volt battery voltage as shown.
4. Verify that air flows through valve.
5. If no air flows, replace the valve.
6. Reinstall valve connector.

7. Reconnect vacuum hoses.

Canister Close Valve <--> [Evaporative Check Valve] > < Canister Purge Solenoid|Description and Operation