Rio L4-1.5L (2001)
10.
Remove two bolts securing fuel distributor to intake manifold.
11.
Gently pry injectors loose from intake manifold.
12.
Disconnect injector connectors and detach injector harness retainers from fuel distributor.
13.
Drain fuel from fuel distributor into an approved container.
14.
Remove injector retaining clips from fuel distributor and remove fuel injectors.
15.
Install new upper "0" rings (included in kit) onto fuel injectors, reinstall fuel injector retaining clips.
16.
Lubricate upper "0" rings with clean engine oil and install injectors into new fuel distributor.
Note:
Use only clean engine oil to lubricate injector "0" rings, the use of grease may plug injector screen resulting in a misfire.
17.
Lubricate lower "0" rings (NOT included in kit) with clean engine oil, reconnect injector electrical connectors before installing fuel distributor
