Rio L4-1.5L (2001)
Wheel Speed Sensor: Testing and Inspection
Sensor Rotor
Front
Front sensor rotor
1. Check rotor for damage.
2. Check if gap be Between rotor and sensor meets the specified value.
Gap: 0.012 - 0.143 inch (0.3 - 1.1 mm)
3. Replace the sensor rotor if necessary.
Rear
Inspection
1. Check rotor for damage.
2. Check if gap between rotor and sensor meets the specified value.
Gap: 0.012 - 0.043 inch (0.3 - 1.1 mm)
3. Remove the sensor rotor if necessary.