Rio L4-1.5L (2001)
4.
Position a fluid container below hose connections. Slide hose clamp back on hose and disconnect hose from transmission cooler pipe.
CAUTION
A small amount of fluid will leak out when hose is disconnected. Wear eye and skin protection and clean up spills immediately.
5.
From below vehicle, repeat for radiator cooler pipe.
6.
Remove clamps from old hose and discard hose. Install hose clamps onto new hose. Position clamps for easy access upon installation.
7.
Install new hose with red paint mark towards transmission cooler pipe and white paint mark towards radiator cooler pipe. Position hose so that the
paint marks on the hose align with corresponding paint marks on cooler pipes.
