Rio L4-1.5L (2001)
Overdrive Switch: Testing and Inspection
Operation inspection
1. Turn ignition switch ON.
2. Verify that the O/D OFF indicator light is not illuminated. Depress O/D OFF switch and verify that the O/D OFF indicator light illuminates.
3. If O/D OFF indicator light does not operate, continue with inspection of voltage test.
Inspection
Voltage
1. Remove Console
2. Turn ignition switch ON.
3. Measure voltage at O/D switch connector H-05.
4. If not as specified, check for continuity at O/D switch.
Continuity inspection
1. Disconnect negative battery cable.
2. Disconnect O/D switch connector.
Table
