Testing and Inspection for Overdrive Switch, A/T in Rio L4-15L (2001)
Location
3. Check for continuity at O/D switch H-05.
4. Replace selector lever Knob if not as specified.
5. Check wiring harness for continuity if switch is operating correctly (O/D switch to transaxle control module, O/D switch to body ground).
6. Connect O/D switch connector.
7. Install console.
8. Connect negative battery cable.
Graph
Table
9. If not as specified, replace transaxle fluid temperature sensor and connector wiring as an assembly.
10. Install air cleaner and fresh air duct.