Rio L4-1.5L (2001)
2. Fill the groove in the release bearing hub with a Lubricant XG-1-C, or equivalent. Also, apply a light film of lubricant on the release fork contact
area. The lubricant areas are shown in the right illustration.
3. Install the release bearing.
4. Install the release fork attaching bolt. Tighten the attaching bolt.
Tightening torque: 26 - 30 ft. lbs. (35 - 41 Nm, 3.6 - 4.2 kg-m)
5. Install the transaxle.
