Rio L4-1.5L (2001)
1. Install the extension bar to the floor, and then onto the transaxle. Tighten the extension bar nut at the transaxle.
Tightening torque: 3.2 - 4.7 kg - m (23 - 34 ft. lbs., 31 - 46 Nm)
2. Tighten the shifter bracket nuts to the specified torque.
Tightening torque: 86.9 - 130.2 inch lbs. (9.8 - 14.7 Nm, 100 - 150 kg-m)
Spring
Make sure that the hooked part of the spring is properly seated in the bracket groove, as shown in the figure.