Rio L4-1.5L (2001)
9. Remove run channel.
Installation
1. Install run channel.
2. Install glass guide.
a. Position glass guide as originally installed through access hole.
b. Install one bolt loosely.
3. Install window regulator assembly
a. Position window regulator assembly as originally installed through access hole.
b. Install seven mounting nuts.
Tighten mounting nuts to 78 - 113 lb-In (9 - 13 N.m, 90 - 130 kg-cm)
4. Install window glass.
a. Position glass carefully. Hold glass from both its inner and outer surfaces, and while tilting it toward hinge side of door, place it on small
bracket on window regulator assembly.
b. Install two glass mounting bolts on window regulator assembly loosely.
