Rio L4-1.6L (2004)
4. Main bearing thickness
REASSEMBLY
1. Inspect journals and bearings for any foreign material. Clean crankshaft, oil holes, and main bearing journals thoroughly, and dry components with
compressed air.
2. Install grooved main bearings into saddles on engine block.
3. Install thrust bearings with oil groove facing crank shaft.
4. Set crankshaft on installed bearings.
5. Install remaining main bearings into main bearing caps.
6. Position Plastigauge on crankshaft journals.
7. Install main bearing caps along with lower main bearings according to cap number and <- mark.
8. Tighten main bearing cap bolts.
