Rio L4-1.6L (2004)
19. Move the crankshaft toward the rear of block with prying tool and check the amount of movement on dial indicator.
20. If end play exceeds specification, grind crankshaft and install oversized thrust bearings, or replace crankshaft and thrust bearings.
OVERSIZE THRUST BEARING WIDTH
21. Install the oil seal in the crankshaft rear oil seal case. Press fit the oil seal all the way in, being careful not misalign it.
22. Install the rear plate and tighten the bolts.
23. Install the connecting rod caps. Refer to "Piston and Connecting Rods".
24. Install the flywheel, front case, oil pan and timing belt.
