Rio L4-1.6L (2004)
Wheel Bearing: Service and Repair
Front
Removal
1. Raise the front of the vehicle and support it with a safety stands.
2. Remove the wheel.
3. Raise the nut tab and remove the driveshaft locknut. Discard the locknut, regardless of condition.
Caution: Use care not to damage the groove and threads in the driveshaft end.
Notice: When loosening the nut, lock the hub by applying the brakes.
4. Remove the cotter pin and the tie rod end attaching nut. Discard the cotter pin, regardless of condition.
