Rio L4-1.6L (2004)
8.
The Hi-Scan Pro will establish communication.
9.
The Hi-Scan Pro will reprogram the ECM automatically.
(See the "ROM ID Information Table" for previous and new ECM ROM IDs)
10.
When the "REPROGRAMMING COMPLETED" message is displayed, turn the ignition key to the OFF position, wait 20 seconds and then start
the engine to check for proper operation.
11.
Check for diagnostic trouble codes (DTCs) using the Hi-Scan Pro with system software card. Erase any diagnostic trouble codes. For automatic
transaxle equipped vehicles, both the engine and transaxle section DTCs must be checked.
