Rio5 L4-1.6L (2006)
Front Door Panel: Service and Repair
REPLACEMENT
DOOR TRIM REPLACEMENT
NOTE:
1) Take care not to scratch the door trim and other parts.
2) Put on gloves to protect your hands.
1. After disconnecting the connector(A), remove the quadrant inner cover(B).
2. After loosen the inside handle cover mounting screw, remove the inside handle cover(A).
3. Loosen the door trim mounting screws. Disconnect the power window switch connector(A), power mirror connector(B). Remove the door trim(E).
4. Installation is the reverse of removal.
NOTE:
1) Make sure of connectors is plugged in properly and each rod is connected securely.
2) Make sure the door lock and opens properly.
