Rio5 L4-1.6L (2006)
Fuel Gauge Sender: Testing and Inspection
FUEL GAUGE SENDER
1. using an ohmmeter, measure the resistance between terminals 1 and 3 of sender connector (A) at each float level.
2. Also check that the resistance changes smoothly when the float is moved from "E" to "F".
Position
Resistance (Ohms)
Sender (E)
184 ± 2
Warning lamp 170 ± 2
1/2
66 ± 2
Sender (F)
15 ± 2
3. If the height resistance is unsatisfied, replace the fuel sender as an assembly.
CAUTION: After completing this test, wipe the sender dry and reinstall It in the fuel tank