Rio5 L4-1.6L (2006)
Battery: Testing and Inspection
Battery Diagnostic Test (1)
BATTERY DIAGNOSTIC TEST (1)
CHECKING FLOW
LOAD TEST
1. Perform the following steps to complete the load test procedure for maintenance free batteries.
2. Connect the load tester clamps to the terminals and proceed with the test as follows:
1. If the battery has been on charge, remove the surface charge by connect a 300 ampere load for 15 seconds.
2. Connect the voltmeter and apply the specified load.
3. Read the voltage after the load has been applied for 15 seconds.
4. Disconnect the load.
Voltage (V)...............................................................................................................................................Temperature ( degrees C (degrees F))
9.6............................................................................................................................................................................................20 (68.0) and above
9.5...............................................................................................................................................................................................................16 (60.8)
9.4...............................................................................................................................................................................................................10 (50.0)
9.3.................................................................................................................................................................................................................4 (39.2)
9.1...............................................................................................................................................................................................................-1 (30.2)
8.9...............................................................................................................................................................................................................-7 (19.4)
8.7.............................................................................................................................................................................................................-12 (10.4)
8.5..............................................................................................................................................................................................................-18 (-0.4)
