Rio5 L4-1.6L (2006)
3. Loosen the oil pump mounting bolts to remove the V belt.
4. Loosen the tension adjusting bolt (A).
5. Remove the power steering drive belt from the power steering oil pump pulley
6. Remove the power steering oil pump mounting bolt and the tension adjusting bolt.
7. Remove the power steering oil pump assembly.
NOTE: Be careful not to drip fluid from the power steering oil pump.
DISASSEMBLY
1. Remove two bolts (A) from the oil pump body (B), and then remove the suction pipe (C) and O-ring.
2. Loosen the four bolts and remove the oil pump cover assembly.
3. Remove the cam ring.
4. Remove the rotor and vanes.
5. Remove the oil pump side plate.