Rio5 L4-1.6L (2006)
Tightening torque: 13.6 - 18.4 Nm (1.36 - 1.84 kgf-m, 9.84 - 13.3 ft. lbs.)
INSTALLATION
1. After installing the oil pump to the oil pump bracket, install the V belt and tighten the bolt (A) adjusting tension to the specified torque.
Oil pump adjusting bolt: 25 - 33 Nm (2.5 - 3.3 kgf-m, 18 - 24 ft. lbs.)
2. Install the pressure hose (A) to the oil pump (B).
Tightening torque: 55 - 65 Nm (5.5 - 6.5 kgf-m, 40 - 47 ft. lbs.)
CAUTION: The pressure hose does not twist and come in contact with other components.
3. Install the suction hose (D) to the suction pipe (C).
4. Add power steering fluid (PSF-III).
5. Bleed the air in the system.
6. Check the oil pump pressure.