Rio5 L4-1.6L (2006)
CAUTION: Be sure to connect between a tube and a hose as shown In the Illustration.
7. Install the two bolts (A) for the lower arm ball joint.
Tightening torque: 100 - 120 Nm (10 - 12 kgf-m, 72 - 86 ft. lbs.)
8. Install the nut (B) on the stabilizer bar link (A).
Tightening torque: 35 - 45 Nm (3.5 - 4.5 kgf-m, 25 - 32 ft. lbs.)
9. Install the tie rod end on the knuckle.
10. Install the front wheel and tire (A) on the front hub (B).
Tightening torque: 90 - 110 Nm (9 - 11 kgf-m, 65 - 79 ft. lbs.)