Rio5 L4-1.6L (2006)
^
The boot band should be replaced with a new one.
1. Remove the clip (B) from drive shaft splines (A) of the transaxle side.
2. Remove both boot bands from the transaxle side UTJ case.
3. Pull out the boot from the transaxle side joint (UTJ).
4. When separating the joint and boot (A), remove the grease from the UTJ case (B).
CAUTION:
^
Be careful not to damage the boot.
^
Make alignment marks on spider roller assembly (A), UTJ case (B), and shaft splines (C) to aid reassembly.
