Rio Cinco L4-1.6L DOHC 16V (2003)
4. Disconnect the vacuum supply hose from the power brake unit.
5. From inside the vehicle, remove the cotter pin securing the clevis pin.
6. Remove the clevis pin from the clevis.
7. Have a second technician support the brake booster in the engine compartment.
8. Remove the four brake booster mounting nuts securing the brake booster to the bulkhead.
9. Remove the brake booster.
10. Remove the gasket between the brake booster and the bulkhead.
INSTALLATION
NOTE: Lubricate the clevis pin with white lithium grease.
To install, reverse the removal procedure.
Tighten the four brake booster mounting nuts.
Tightening torque: 18.6 - 25.5 Nm (1.9 - 2.6 kg-m, 13.7 - 18.8 ft. lbs.)
