Rio Cinco L4-1.6L DOHC 16V (2003)
3. Install the ABS sensor wire attaching trim.
4. Put the ABS sensor into the back plate and install the ABS sensor.
Tightening torque: 8 - 12 Nm (0.8 - 1.2 kg-m, 6 - 8 ft. lbs.)
5. Install the rear shock absorber attaching bolt.
Tightening torque: 78 - 98 Nm (8.0 - 10.0 kg-m, 58 - 72 ft. lbs.)
6. Connect the negative battery cable from the battery.
