Rio Cinco L4-1.6L DOHC 16V (2003)
9. Remove the camshaft pulley.
10. Remove the cam carrier assembly and timing belt.
11. Remove the camshaft.
12. Remove the HLA.
INSPECTION
1. Set front and rear camshaft bearing journals on V-blocks.
2. Position a dial indicator on center bearing journal and zero dial.
3. Rotate camshaft in V-blocks and check runout.
Runout: 0.0012 inch (0.03 mm) maximum
4. Check camshaft for uneven wear patterns, cracks, or damage.
5. Measure cam lobe heights at two points as shown.
Lobe height
Intake, Exhaust
Standard: 1.6878 inch (42.870 mm)
Minimum: 1.6877 inch (42.868 mm)