Rio Cinco L4-1.6L DOHC 16V (2003)
Tightening torque: 40 - 43 ft. lbs. (54 - 59 Nm, 5.5 - 6.0 kg-m)
16. Rotate crankshaft to ensure it does not bind.
17. Place a dial indicator against front of crankshaft and zero gauge.
18. Using a prying tool, move crankshaft forward and zero dial indicator.
19. Move the crankshaft toward the rear of block with prying tool and check the amount of movement on dial indicator.
End Play: 0.0032 - 0.0111 inch (0.080 - 0.282 mm)
20. If end play exceeds specification, grind crankshaft and install oversized thrust bearings, or replace crankshaft and thrust bearings.
OVERSIZE THRUST BEARING WIDTH
21. Install the oil seal in the crankshaft rear oil seal case. Press fit the oil seal all the way in, being careful not misalign it.
22. Install the rear plate and tighten the bolts.
23. Install the connecting rod caps.
24. Install the flywheel, front case, oil pan and timing belt.
