Rio Cinco L4-1.6L DOHC 16V (2003)
Air/Fuel Mixture: Description and Operation
AIR/FUEL MIXTURE CONTROL SYSTEM [MULTIPORT FUEL INJECTION (MFI) SYSTEM]
The MFI system is a system which uses the signals from the heated oxygen sensor to activate and control the injector installed in the manifold for each
cylinder, thus precisely regulating the air/fuel mixture ratio and reducing emissions.
This in turn allows the engine to produce exhaust gases of the proper composition to permit the use of a three way catalyst. The three way catalyst is
designed to convert the three pollutants
1. hydrocarbons (HC),
2. carbon monoxide (CO), and
3. oxides of nitrogen (NOx) into harmless substances.
There are two operating modes in the MFI system.
1. Open Loop air/fuel ratio is controlled by information programmed into the ECM.
2. Closed Loop air/fuel ratio is adjusted by the ECM based on information supplied by the oxygen sensor.
