Rio Cinco L4-1.6L DOHC 16V (2003)
4.
Install the new outboard right anchor stamped "FR" using the two (2) bolts from the original anchor and torque to 16-22 lb-ft.
5.
Install the rear seat back in the reverse order of removal and torque bolts to 16-22 lb-ft.
6.
Install the rear seat bottom cushion in the reverse order of removal and torque bolts to 16-22 lb-ft.
* NOTICE
Make sure all three (3) safety belt buckles and the center lap belt are exposed and in the correct location after installing the rear seat bottom.
7.
Install SC057 Campaign Completion Label in the engine compartment on the bulkhead above the brake booster.
AFFECTED PRODUCTION RANGE:
2003, 2004 and 2005MY Rio 4-Door vehicles with production dates through 6/11/05.
PART NUMBER INFORMATION
