Rio Cinco L4-1.6L DOHC 16V (2003)
7. Connect the voltmeter to measure between the positive battery terminal post and the starter solenoid battery terminal stud.
8. Turn the ignition switch to START and observe the reading on the DVOM. If the reading is above 0.2 V, clean and tighten the battery cable
connection at the solenoid and repeat the test. If the reading is still above 0.2 V, replace the faulty positive battery cable.
9. Connect the DVOM to measure between the negative battery terminal post and a good clean ground on the engine block.
10. Turn the ignition switch to START and observe the DVOM. If the reading is above 0.2 V, clean and tighten the battery cable connection on the
engine block and repeat the test. If the reading is still above 0.2 V, correct the faulty negative battery cable.
11. Connect the DVOM positive lead to the starter housing. Connect the DVOM negative lead to the negative battery terminal post.
12. Turn the ignition switch to START and observe the DVOM. If the reading is above 0.2 V, correct the poor starter to engine block ground contact.
