Rio Cinco L4-1.6L DOHC 16V (2003)
8. Remove the four steering gear mounting bolts and washers.
9. Slide the steering gear to the left and pull the right tie rod through the fender opening.
10. Remove the steering gear by sliding it to the right.
Installation
1. Position the steering gear in its mounting location.
2. Attach the intermediate shaft to the steering gear pinion and tighten the mounting bolt to 13 - 20 ft. lbs. (18 - 26 Nm, 1.8 - 2.7 kg-m)
3. Connect the high pressure and return pipe and then tighten the bolts.
Tightening torque: 29 - 43 ft. lbs. (39 - 59 Nm, 4.0 - 6.0 kg-m)
4. Install the steering gear mounting and tighten mounting bolt and nut.
Tightening torque: 27 - 38 ft. lbs. (37 - 52 Nm, 3.8 - 5.3 kg-m)